|
|
|
|
|
|
Brake Disc Rotor Bolt
|
Our Price: $7.78
|
|
|
These Brake Disc bolts are the most common for holding Chinese Brake Discs to the wheel. These are High Grade and already have a drop of Loctite applied. When it comes to your brakes only trust them to the best.
|
|
|
|
|
|
|
|
|
|
Brake Lever Threaded Adjuster
|
|
Our Price: $7.98
|
|
|
This is the thread adjuster that is the brake handles of the Touring and Bali styled scooters. It has a slot in one end to loosen or tighten with a standard screwdriver and comes with a set nut.
|
|
|
|
|
|
|
|
|
|
Straight Valve Stem
|
|
Our Price: $7.98
|
|
|
This scooter valve stem will replace the 90 degree angle stems on most wheels that are larger than 10 inch (rim size)
|
|
|
|
|
|
|
|
|
|
Drum Brake Activator Camshaft
|
|
Our Price: $9.98
|
|
|
Drum Brake Activator Camshaft for 50cc and 150cc scooters with drum brakes. Most common in the rear but has been used in the front too.
|
|
|
|
|
|
|
|
|
|
Drum Brake Rocker Arm Lever
|
|
Our Price: $9.98
|
|
|
This drum brake rocker arm lever attaches to the drum brake activator shaft.
|
|
|
|
|
|
|
|
|
|
90 Degree Valve Stem
|
|
Our Price: $9.98
|
|
|
Most common tire valve stem on chinese scooters. It can be replaced with the straight stem if room allows.
|
|
|
|
|
|
|
|
|
|
Front Wheel Spacer
|
|
Our Price: $9.98
|
|
|
This front wheel spacer is for Tank Touring 150DE and Tank Touring 250 & Roketa Bali Models as well as all the other Chinese Touring Scooters like BMS, Machoman, Jonway, Jmstar, & Lance
|
|
|
|
|
|
|
|
|
|
Rear Wheel Spindle Nut (Most 50cc-250cc scooters)
|
|
Our Price: $13.98
|
|
|
This Locking Rear Wheel Spindle Nut fits most 50cc-250cc Chinese scooters.
Notes: Requires a 24mm socket.
|
|
|
|
|
|
|
|
|
|
Inner Tube 200 x 50 Bent Stem
|
|
Our Price: $15.98
|
|
|
This 200x50 inner tube is popular in the kids standup scooters with the smaller wheels. It has a 90 degree angle filling stem. It matches the 200 x 50 tire.
|
|
|
|
|
|
|
|
|
|
Brake Shoe Stationary Mount Pin
|
|
Our Price: $21.98
|
|
|
This is the stationary lower Pin that is mounted to the motor that the brake shoes are mounted on. This is the same for the QMB139 motors and the GY6. Often times this cutoff flush on motors that were intended for disc brake wheels.
|
|
|
|
